Vented Oil Cap
This vented oil cap kit is designed to allow you to delete the PCV valve that goes between your intake manifold and cylinder head. This valve along with the valve cover breather hose deposit a very large amount of oil and contaminants from your engines crank case into your intake tract which dirties your valves and kills performance and economy. When you delete this valve and block it’s hole off you then use the vented oil cap to route that crank case pressure to a vented or sealed oil catch can.
A vented setup would have the hose from the oil cap and the valve cover going to a catch can with a hole or filter on top to catch the oil vapor and allow the pressure to escape. With this vented setup you would seal the hole/barb that would normally go to the hose coming from the valve cover.
A sealed setup would have the oil cap and valve cover routed to a catch can and a line from the catch can back to the intake tube.
Recommended Oil Catch Can:
3 Port Catch Can (recommended to go from oil cap to catch can and valve cover breather to catch can then from the outlet to the intake)
Recommended Fittings For Oil Cap:
Plug For Hole To Use Just As Oil Cap
Recommended Hose:
10ft of 8an Braided Hose (fits the fittings on the recommended catch cans)
Fitment:
2017 - Present 4 cylinder Camry
2019 - Present Corolla E210
2019 - Present RAV4 5th Gen
Universal fitment with most Toyotas for the oil cap minus the PCV delete.
This vented oil cap kit is designed to allow you to delete the PCV valve that goes between your intake manifold and cylinder head. This valve along with the valve cover breather hose deposit a very large amount of oil and contaminants from your engines crank case into your intake tract which dirties your valves and kills performance and economy. When you delete this valve and block it’s hole off you then use the vented oil cap to route that crank case pressure to a vented or sealed oil catch can.
A vented setup would have the hose from the oil cap and the valve cover going to a catch can with a hole or filter on top to catch the oil vapor and allow the pressure to escape. With this vented setup you would seal the hole/barb that would normally go to the hose coming from the valve cover.
A sealed setup would have the oil cap and valve cover routed to a catch can and a line from the catch can back to the intake tube.
Recommended Oil Catch Can:
3 Port Catch Can (recommended to go from oil cap to catch can and valve cover breather to catch can then from the outlet to the intake)
Recommended Fittings For Oil Cap:
Plug For Hole To Use Just As Oil Cap
Recommended Hose:
10ft of 8an Braided Hose (fits the fittings on the recommended catch cans)
Fitment:
2017 - Present 4 cylinder Camry
2019 - Present Corolla E210
2019 - Present RAV4 5th Gen
Universal fitment with most Toyotas for the oil cap minus the PCV delete.